Three-point bending test comparison of fiber-reinforced composite archwires to nickel-titanium archwires. Orthodontics (Chic.) 2012;13(1):46-51
Date
05/09/2012Pubmed ID
22567615Scopus ID
2-s2.0-84979863233 (requires institutional sign-in at Scopus site) 5 CitationsAbstract
AIM: Various alternatives to metal orthodontic archwires have produced varied successes over the years. This study sought to evaluate the bending properties of fiber-reinforced polymeric composite (FRC) archwires compared with similarly sized nickel-titanium (Ni-Ti) archwires.
METHODS: Two different 0.018-inch translucent FRC orthodontic wires (Translucent Archwire I and Translucent Archwire II) were tested against 0.014-, 0.016-, and 0.018-inch nonsuperelastic nickel titanium orthodontic wires. The wires in each group (n = 10) were evaluated with three-point bending using a universal testing machine. Wire segments were deflected at midspan to 3.1 mm at a rate of 2 mm/min. Loading and unloading slope and modulus were calculated, as were force values during activation and deactivation and elastic recovery.
RESULTS: It was found that the 0.018-inch Ni-Ti archwire demonstrated the highest force values at different deflection distances followed by Translucent Archwire II, 0.016-inch Ni-Ti, Translucent Archwire I, and finally 0.014-inch Ni-Ti. 0.016-inch Ni-Ti exhibited the highest modulus value, followed by 0.018-inch Ni-Ti, 0.014-inch Ni-Ti, Translucent Archwire II, and finally Translucent Archwire I. During deactivation, the elastic recovery of 0.014-inch Ni-Ti and 0.016-inch Ni-Ti was significantly greater than Translucent Archwire II.
CONCLUSION: The bending properties of BioMer's FRC archwires were found to be comparable to Ni-Ti, as advertised by the manufacturer.
Author List
Ballard RW, Sarkar NK, Irby MC, Armbruster PC, Berzins DWAuthor
David Berzins BS,PhD Graduate Program Director for Dental Biomaterials in the General Dental Sciences/Dental Biomaterials department at Marquette UniversityMESH terms used to index this publication - Major topics in bold
Dental AlloysDental Stress Analysis
Materials Testing
Nickel
Orthodontic Wires
Titanium









